10
A01-00104 Rev A
• The total leakage current of the UPM and consumer connected equip-
ment should not exceed 3.5 mA for non-medical units.
• Not for use in a computer room as dened in the Standard for the
Protection of Electronic Computer/Data Processing Equipment, ANSI/
NFPA 75.
• The socket-outlet shall be installed near the equipment and shall be
easily accessible.
• The battery should be disconnected from the UPM by unplugging at its
quick connectors when maintenance or service work inside the UPM is
necessary.
• Do not dispose of batteries in a re – batteries may explode.
• Do not open or mutilate batteries. Doing so may release electrolyte or
other toxic substances, which may be harmful to the skin, eyes, or the
environment.
A battery can present a risk of electric shock and high short circuit current.
The following precautions should be observed when working with batteries:
• Remove watches, rings, or any other metal jewelry or objects which
may make contact with the battery.
• Use tools with insulated handles.
Unit is suitable for IT applications.
To Next Page
Loading...
Need help?
General
