6
A01-00104 Rev A
1.0 INTRODUCTION
Thank you for your purchase of the Security II Series Rackmount UPM (
hereafter referred to as “UPM”). We manufacture two versions of the UPM
– a standard version, and a medical version listed to UL60601-1 and cUL
C22.2 No. 60601.1. In addition, all models are compatible with International
electrical distribution systems. International versions are UL listed (Medical
listed to IEC60601-1 and EN60601) and carry the CE Mark. We’ve prepared
this document to help familiarize you with the functions and controls of this
product. If, after reviewing this manual, you have any questions at all, please
feel free to contact our technical support team by phone (1-800-369-7179) or
email us at service.powervar@ametek.com.
We are a global provider of power management solutions, headquartered in
Waukegan, Illinois, with international sales and distribution ofces in Swin-
don, United Kingdom, Toronto, Canada, Mexico City, Mexico and Germany.
All solutions incorporate a high energy surge diverter, a noise lter and a low
impedance isolation transformer. Together these components prevent pow-
er disturbances from destroying, degrading or disrupting system operations.
Registering your Product
Please take a few moments to register your product purchase. Registration
is easy and quick via the product registration page found on our website at
www.powervar.com.
To Next Page
Loading...
Need help?
General
