EasyManuals Logo

Ametek c Service Manual

Ametek c
54 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #6 background imageLoading...
Page #6 background image
6 26-03-2004 123200 03
1.2 Safety instructions
Read this manual carefully before doing
any maintenance on the instruments!
Please follow the instructions and procedures described in
this manual in order to maintain the instruments correctly
and to avoid any personal injuries and/or damage to the
instruments.
Warning
The calibrator is designed for interior use only and
should not be used in risk-prone areas, where
vapour or gas leaks, etc. may constitute an explosives
hazard.
Never use heat transfer fluids such as silicone, oil,
paste, etc. These fluids may penetrate the calibrator
and cause damage or create poisonous fumes.
Caution – Hot surface
This symbol is engraved in the grid plate.
Do not touch the grid plate, the well or the insertion
tube as the calibrator is heating up – they may be very
hot.
Do not touch the handle of the calibrator during use – it
may be very hot.
Note…
The product liability only applies if the instrument is
subject to a manufacturing defect. This liability
becomes void if the service personnel fails to follow the
maintenance instructions set out in this manual or uses
unauthorised spare parts.
The instrument must not be exposed to draughts.

Other manuals for Ametek c

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Ametek c and is the answer not in the manual?

Ametek c Specifications

General IconGeneral
BrandAmetek
Modelc
CategoryMeasuring Instruments
LanguageEnglish

Related product manuals