Need help?Do you have a question about the Ametek Drexelbrook Universal IV and is the answer not in the manual?
General| Brand | Ametek |
|---|---|
| Model | Drexelbrook Universal IV |
| Category | Measuring Instruments |
| Language | English |
Overview of the Drexelbrook Universal IV Cut Monitor system components and communication methods.
Guidance on carefully removing and checking all items from the product carton.
Critical safety guidelines for installation, start-up, and service in explosive atmospheres.
Essential pre-power checklist for proper installation and application matching.
Recommendations for mounting the sensing element for optimal performance and accuracy.
Guidance on mounting the integral and remote electronic units, including environmental considerations.
Instructions for connecting the electronic unit to the signal loop and power supply.
Procedures for connecting the sensing element, covering integral and remote setups.
Steps for configuring and calibrating the instrument using Drexelbrook's HRTwin software.
Method for calibrating the instrument using sampled fluid and HRTwin software.
How to adjust the measurement span and input/output curves for optimal accuracy.
Instructions for saving configuration data and printing reports from the software.
Guide to accessing and modifying instrument settings via the built-in display and keypad.
Installation guidelines for potentially explosive atmospheres and general safety precautions.
Overview of the Universal IV system as a continuous level measurement system.
Crucial electrical connection warnings and intrinsic safety considerations for hazardous areas.
Start-up checklist and steps for commissioning the device in hazardous locations.
Procedures for accessing and closing the compartment cover safely for system configuration.
Details on FM US and Canada approvals for hazardous location installations.
Specifications for ATEX and IECEx certifications for hazardous area compliance.
To Next Page