Ametek Drexelbrook Universal IV

AMETEK Drexelbrook makes no warranty of any kind with regard to the material contained in this
manual, including, but not limited to, implied warranties or tness for a particular purpose. Drexelbrook
shall not be liable for errors contained herein or for incidental or consequential damages in connection
with the performance or use of material.
© Copyright AMETEK Drexelbrook
Table of Contents
Section 1: Installation .......................................................................................................... 1
1.1 System Description .............................................................................................. 1
1.2 Unpacking ............................................................................................................ 1
1.3 Safety Information ................................................................................................ 1
1.4 Commissioning - Start Up Checklist ................................................................... 2
1.5 Installation ............................................................................................................ 3
1.6 Mounting The Electronic Unit .............................................................................. 5
1.7 Wiring the Electronic Unit .................................................................................... 8
1.8 Wiring The Sensing Element ................................................................................ 9
Section 2: Configuration / Calibration ............................................................................. 11
2.1 Configuration And Calibration With Drexelbrook Software, HRTwin ............... 11
2.2 One Shot® Calibration Trim Using Hrtwin Software ......................................... 12
2.3 Range Change .................................................................................................... 13
2.4 Save/Print Entries ............................................................................................... 14
2.5 Calibration / Configuration Via Display / Keypad ............................................. 15
Section 3: Hazardous Location Approval Supplementary Instructions ...................... 18
3.1 General safety information ................................................................................ 18
3.2 The Compartment Cover ................................................................................... 19
3.3 Standards and Approvals .................................................................................. 20