Need help?Do you have a question about the Ametek ORTEC digiBASE and is the answer not in the manual?
General| Brand | Ametek |
|---|---|
| Model | ORTEC digiBASE |
| Category | Measuring Instruments |
| Language | English |
Outlines the procedure for returning instruments for repair, including authorization.
Instructions for physically setting the coarse gain multiplier using an internal jumper.
Step 1: Install the driver kit, selecting USB-based instruments for proper recognition.
Step 2: Install the MAESTRO MCA Emulation Software according to its user manual.
Step 4: Run the configuration program to establish communication and detect the digiBASE.
Method to change instrument IDs and descriptive names via the configuration dialog.
Configures advanced shaping parameters and enables the InSight Virtual Oscilloscope.
Sets acquisition limits based on Real Time or Live Time, disabling if set to zero.
Defines the syntax and structure for composing commands to the digiBASE.
Lists and explains macro and micro error codes for diagnosing command execution issues.
To Next Page