digiBASE
®
PMT Base with Integrated Bias Supply, Preamplifier and Digital Multichannel Analyzer 931003E / 0620
1.1. Host Computer and Software Requirements
The digiBASE is completely computer-controlled and can be operated with any suitable version
of ORTEC spectroscopy software, including MAESTRO, which is supplied with the instrument.
The digiBASE connects via a USB port.
1.2. About This Manual
This manual describes the digiBASE, tells how to connect it in a complete spectroscopy system,
gives instructions on configuring the hardware settings (such as high voltage, presets, and gain),
and supplies the hardware commands and responses. Complete details on using the control soft-
ware are in the MAESTRO Software User’s Manual.
2
To Next Page
Loading...
