105446 06 23-03-2009 107
THERMAL SPECIFICATIONS –
DRY - BLOCK
ATC-250 A/B
Well specifications 40 mm / 1.57 inch axial homogeneity :
0.10°C / 0.18°F @250°C / 482°F
0.05°C / 0.09°F @140°C / 284°F
0.05°C / 0.09°F @50°C / 122°F
50 mm / 1.97 inch axial homogeneity :
0.20°C / 0.36°F @250°C / 482°F
0.10°C / 0.18°F @140°C / 284°F
0.05°C /0.09°F @50°C / 122°F
60 mm / 2.36 inch axial homogeneity :
0.25°C / 0.45°F @250°C / 482°F
0.15°C / 0.27°F @140°C / 284°F
0.05°C / 0.09°F @50°C / 122°F
70 mm / 2.76 inch axial homogeneity :
0.40°C / 0.72°F @250°C / 482°F
0.20°C / 0.36°F @140°C / 284°F
0.05°C / 0.09°F @50°C / 122°F
80 mm / 3.15 inch axial homogeneity :
0.50°C / 0.90°F @250°C / 482°F
0.25°C / 0.45°F @140°C / 284°F
0.05°C / 0.09°F @50°C / 122°F
Difference between borings :
0.05°C / 0.09°F
Influence from load :
0.25°C / 0.45°F @250°C / 482°F
Influence from load with
Ext. Reference :
0.03°C / 0.05°F @250°C / 482°F
Long term drift (1 year) :
±0.05°C / ±0.09°F
To Next Page
Loading...
Need help?
General
