2 123311 01
1.0 Introduction
ITC-calibrators are temperature calibrators designed to calibrate
temperature sensors and temperature switches.
Read this manual carefully before using the instrument and make
sure that all safety instructions and warnings are observed.
1.1 List of equipment received
When you receive the instrument, the following should be enclosed:
• 1 calibrator
• 1 mains cable
• 1 set of test cables (1 black, 1 red)
• 1 insertion tube
• 1 tool for insertion tube
• 1 traceable certificate
• 1 reference manual
• 1 user manual
• RS232 serial cable
• 1 CD-ROM containing software package “JOFRACAL” (The
adjustment software “AmeTrim” is not applicable to the ITC-
calibrators)
To Next Page
Loading...
Need help?
General
