Ametek JOFRA RTC-156 A - Page 146

127139 13 2014-07-30 145
THERMAL SPECIFICATIONS –
LIQUID BATHS
RTC-250 A/B
Well specifications 40 mm / 1.57 inch axial homogeneity:
±0.010°C/0.018°F@ 28°C/82.4°F to 150°C/302°F
40 mm / 1.57 inch axial homogeneity:
±0.020°C/0.036°F@150°C/302°F to 250°C/482°F
50 mm / 1.97 inch axial homogeneity:
±0.010C/0.018°F@ 28°C/82.4°F to 150°C/302°F
50 mm / 1.97 inch axial homogeneity:
±0.020°C/0.036°F@150°C/302°F to 250°C/482°F
60 mm / 2.36 inch axial homogeneity:
±0.010C/0.018°F@ 28°C/82.4°F to 150°C/302°F
60 mm / 2.36 inch axial homogeneity:
±0.020°C/0.036°F@150°C/302°F to 250°C/482°F
70 mm / 2.76 inch axial homogeneity:
±0.025°C/0.045°F@ 28°C/82.4°F to 150°C/302°F
70 mm / 2.76 inch axial homogeneity:
±0.025°C/0.045°F@150°C/302°F to 250°C/482°F
80 mm / 3.15 inch axial homogeneity:
±0.025°C/0.045°F@ 28°C/82.4°F to 150°C/302°F
80 mm / 3.15 inch axial homogeneity:
±0.050C/0.09°F @ 150°C/302°F to 250°C/482°F
Radial homogeneity:
0.015°C / 0.027°F
Influence from load :
0.10°C / 0.18°F @250°C / 482°F
Influence from load with Ext. Reference :
0.02°C / 0.04°F @250°C / 482°F
Difference between insert/oil :
0.30°C / 0.54°F
Long term drift (1 year) :
±0.05°C / ±0.09°F