Ametek Land Cyclops 160L - Menu Mode Settings and Icons; Menu Icons: Exit, Emissivity, Record Mode

7 - 11
Cyclops LPortable Thermometers
User Guide
7.6 Menu Mode - Icon Descriptions
Theinformationinthischaptershouldbeusedinconjunctionwiththe
navigationalowchart(Fig.7-7).
7.6.1 Exit
WheninMenuMode,clickingontheexiticonwillreturnyoufromanysub-menu.
7.6.2 Emissivity
Usethe
and keystoentertherequiredvalue.Forinformationon
emissivityvalues,seeSection11-Emissivity.Thedefaultvalueis1.00.
*Available when Operator Emissivity Mode is selected.
7.6.3a Record Mode
ReadingstakeninClassic,BurstorLatchedmodecanbestoredwithinthe
Cyclopsforlaterdownload.Therecordingfacilitycanbeswitchedonoroby
selectingtheicons(i)Onor(ii)O.
Readingsarestoredagainstcurrenttimeordatesetontheclock(SeeSection
7.4.13).
Thereadingsarealsostoredagainsta8-characteralpha-numericlocationID,
whichcanbesetbyselectingtheIDicon(iii).HavingsetthelocationID,itis
possibletoauto-incrementtheIDoneachtriggerpress,SeeSection8.
ThestoredreadingscanbedownloadedbyselectingtheDownloadicon(iv).
ThedataisstreamedtoboththeBluetoothandUSBoutputs.Theprotocolof
thestreameddataisgiveninAppendix1.
ThestoredreadingscanbedeletedbyselectingtheDeleteicon(v).Toprevent
accidentaldeletion,thisiconrequiresadoubleentry.
ThestoredreadingscanbereviewedbyselectingtheReviewicon(vi).
(i) (ii)
(iii)
(iv) (v)
(vi)
or
*
* * *