Need help?Do you have a question about the Ametek Land Cyclops 160L and is the answer not in the manual?
General| Output | Bluetooth, USB |
|---|---|
| Spectral Response | 1.6 µm |
| Power Supply | 2 x AA batteries |
| Protection Rating | IP65 |
| Measurement Type | Infrared |
| Accuracy | ± 0.5% of reading |
| Emissivity | 0.1 to 1.0 |
| Sighting | Through the lens |
| Operating Temperature | 0 °C to 50 °C |
| Storage Temperature | -20°C to 70°C |
| Weight | 0.5 kg |
Covers warnings, safety signs, equipment operation, protective clothing, electrical supply, storage, unpacking, and lifting.
Details the primary technical specifications of the Cyclops thermometer models.
Lists further technical specifications including accuracy, power, weight, and accessories.
Identifies and describes the main components and features of the thermometer.
Explains the battery requirements and power source options for the thermometer.
Describes the ON/OFF switch, trigger, and LCD display panel operations.
Introduces the four basic display modes: Measure, Menu, Route, and Emissivity.
Presents the overall structure and navigation of the Cyclops menu system.
Describes icons for exiting menus, setting emissivity, and enabling record mode.
Explains icons for trigger modes, alarms, averaging, and unit selection.
Introduces trigger operations and details Classic, Route, and Emissivity modes.
Explains the Burst and Latched trigger operation modes.
Lists and explains the different setup groups and their available selections.
Lists typical emissivity values for materials measured by 100L/160L models.
Explains common error codes and their implications for instrument function.
To Next Page