Need help?Do you have a question about the Ametek LAND SPOT+ Series and is the answer not in the manual?
General| Emissivity | 0.1 to 1.0 |
|---|---|
| Output | 4 to 20 mA |
| Power Supply | 24 V DC |
| Display | LCD |
| Operating Temperature | 0°C to 50°C |
| Storage Temperature | -20°C to 60°C |
Read all instructions, warnings, and cautions before product use.
Explanation of hazard symbols and their meanings on equipment and documentation.
Guidelines for safe operation and system responsibility.
Mandatory protective clothing, face, and eye protection for high-risk environments.
Instructions for isolating power lines and connecting cables correctly.
Contact details for AMETEK Land offices and service inquiries.
Guidelines for proper storage, unpacking, and lifting of the instrument.
Instructions for returning damaged or faulty goods for repair.
Information on design, manufacturing standards, and copyright.
Explains the SPOT+ range and its communication options over Ethernet.
Details of SPOT+ parameters transmitted as integers with scaling factors.
Supported functions for implicit and explicit messaging, and data structures.
Screenshot of EtherNet/IP client configuration and parameter display.
Enables SPOT+ communication via EtherNet/IP from any source.
Disables EtherNet/IP communication functions.
Specifies communication speed, transmission media, and cable length.
Details supported functions, connections, cycle time, and address setting.
To Next Page