Ametek LAND SPOT+ Series - Introduction to SPOT+ and EtherNet;IP; Overview of SPOT+ Pyrometers

SPOT+
1 - 1REST API User Guide
INTRODUCTION
1
1.1 Introduction
This User Guide explains how to communicate with a SPOT+ pyrometer using the
EtherNet/IP.
AMETEK Land’s SPOT+ range is a family of fully-featured smart pyrometers for non-
contact temperature measurements. Available in a number of temperature ranges and
models, SPOT+ pyrometers provide immediate local display and onboard analogue I/O
together with multiple communication options over Ethernet: Embedded Webserver,
Modbus TCP/IP, REST API (http) and EtherNet/IP.
The EtherNet/IP interface is one of the most widely-used industrial Ethernet protocols
worldwide and is ideal for factory automation applications.
The SPOT+ EtherNet/IP interface is designed to allow read and write of only those
parameters required during normal operation. The SPOT+ embedded webserver
should be used for initial instrument conguration – setting parameters such as the IP
address or process window correction that will remain xed after initial commissioning.
Information on conguration of the SPOT+ using the embedded webserver is given in
the SPOT+ User Guide.
An electronic datasheet (EDS) is available to download from the AMETEK Land website,
www.ametek-land.com/spot.