Ametek T-2 User Manual

Operation and Maintenance  11
Type T Pump Operation Manual
3 Pull the pump handle to the top of its stroke.
4 Open the vent valve.
5 Pull out the valve rod selector to select low pressure/high volume.
Open the vent valve… then select low pressure/high volume.
6 Pump ten full strokes.
7 Close the vent valve
8 Continue pumping to verify the low pressure/high volume setting operates properly and that the pump holds pressure.
9 Open the vent valve.
10 Pump ten more strokes.
11 Remove the high pressure/low volume check valve plug.

Ametek T-2 Specifications

General

Brand	Ametek
Model	T-2
Category	Water Pump
Language	English