Specifications
Pressure Ranges
T, T-1, T-1-CPF, T-2, and T-3 . . . . . . . 0 to 1000 bar / 0 to 15 000 psi
Recommended Test Fluids
The following uids are recommended for use with this pump:
Standard ............................. Distilled water or Isopropyl alcohol
Optional .............................. MGAAA oil
Other uids compatible with stainless steel, Monel, Buna N and Teon may be used. Optional Viton and EPT o-rings are available.
Volume ............................... 30 oz (887 mL)
Low Volume / High Pressure Setting ... 2.8 to 3.2 cc per stroke
High Volume / Low Pressure Setting ... 3.0 to 4.0 cc per stroke
Pressure Connections
X
Reference Port
T-1, T-2, and T-3 . . . . . . . . . . . . 1/4" FNPT or 1/2" FNPT
T-1-CPF . . . . . . . . . . . . . . . . . . . . CPF Male
X
Device Under Test Port
T-1, T-2, and T-3 . . . . . . . . . . . . 1/4" FNPT or 1/2" FNPT
T-1-CPF . . . . . . . . . . . . . . . . . . . . 1/4" Female NPT
Note: Additional sizes, including metric ttings, are available. Contact us, or see our CPF datasheet for details.
Dimensions
Pump . . . . . . . . . . . . . . . . . . . . . 224 (L) x 127 (W) x 217 (H)* mm.
Weight . . . . . . . . . . . . . . . . . . . . 18.6 lbs / 8.4 kg
*
Height includes manifold.
To Next Page
Loading...
Need help?
General
