Overview
INTRODUCTION
The Type T Series hand pump, mounted on a drip pan with a manifold assembly, is capable of producing pressures up to 1000 bar/15 000 psi.
These units are self-contained pressure sources designed to test instruments. They may be used to calibrate pressure gauges or to set hydraulic relief valves
and pressure switches. These units produce pressure to test components or systems, and work independently of other pressure sources. CP
F
versions include
Crystal Pressure Fittings (CPF), which allow users to produce leak-free seals without tools or thread tape. CPF ttings also include a self-venting weep hole to
help assure a safe disconnection from a pressurized system.
U.S. Patent No. 8,794,677
T, T-1, and T-2 pumps
1
may be ordered as part of a Pump System, complete with a JOFRA or Crystal Pressure Indicator. T-3 pumps ship as part of a complete
comparator testing kit, including four analog test gauges and necessary mounting tools and ttings, all housed in a rugged metal carrying case. For more
details on T-3 comparator testing kits, refer to T-3 Pumps for Hydraulic Comparator Kits on page 2.
All Type T Series Pump Systems include the most commonly used pressure ttings, seals, etc., all packaged in a carrying case with a custom insert.
1 T designates a pump only. T-1 designates a pump with a manifold and tools. T-2 designates a pump with manifold, tools, and a carrying case.
T, T-1, and T-2 Pumps
Pressure Medium O-rings
Pump System
T-1 Water
*
Buna-N
FWB
T-1- CPF Oil or Water
*
Viton® FOV or FWV
T-1/VITON Water
*
Viton® FWV
T-1/EPT Water
*
EPT FWE
T-1/OIL Oil Buna-N FOB
T-1/OIL/VITON Oil Viton® FOV
T-1/OIL/EPT Oil EPT
FOE
*
Water is a 50/50 mixture of water and Isopropyl Alcohol.
Type T Series Pump System
To Next Page
Loading...
Need help?
General
