8
English
Attitude and orientation
• Horizontal Attitude - The Horizontal Attitude icon can be found under the
instrument tab in the Positioning section. To move the stylus horizontally,
press the “Horizontal Attitude” button and select the orientation.
Click the Horizontal Attitude icon and the following
window will open. The diagram within the window
displays the current rotation of the stylus. Only when
‘Apply’ or ‘OK’ is pressed will the instrument gauge
orientation change take place.
1. 90 Degree Rotations - Clicking one of the
buttons on any direction of the diagram will
set the stylus to face that direction.
2. Orientation Angle Textbox - The current
orientation of the stylus is displayed in
degrees. Change this manually by typing a
number between 0 and 359 degrees.
3. Orientation Angle Arrows - Increase or
decrease the orientation angle by the number
shown above them.
4. Snap Checkbox - Switches the number
above the orientation angle arrows from 15
to 1. When set to ‘15’ the selected rotation is
snapped to the nearest 15 degrees.
3
2
1
4
• Vertical Attitude - The Vertical Attitude icon can be found under the
instrument tab in the Positioning section. To move the stylus vertically,
press the “Vertical Attitude” button and select the orientation.
Click the Vertical Attitude icon and the following
window will open. Selecting either X+ or X- will
rotate the stylus to that vertical orientation.
To Next Page
Loading...
