AMI 227 - Table of Contents

MODEL 227
OPERATION MANUAL
Doc # 740063 Rev E
TABLE OF CONTENTS
SECTION DESCRIPTION PAGE
SECTION I INTRODUCTION
1.0 Introduction 1.1
1.1 Safety Precautions 1.2
1.2 Operational Precautions 1.4
1.3 RF and EMI emissions 1.5
1.4 Shock Hazard Warning 1.8
SECTION II SPECIFICATIONS
2.0 Electrical 2.1
2.1 Physical Construction 2.3
2.2 Programmable Functions 2.3
2.3 Multi-level Functions 2.4
2.4 Non-Programmable Functions 2.4
2.5 Ambient Temperature Ranges 2.4
2.6 Cable Operating Distance Limits 2.4
SECTION III INSTALLATION
3.0 Inspection 3.1
3.1 Power Connection 3.1
3.2 Welding Gas Connections 3.2
3.3 Adapter Cable to M-227 Installation 3.3
3.4 Weld Head Installation 3.7
3.5 Ground (Work) Cable Installation 3.7
3.6 Remote Pendant Installation 3.8
SECTION IV SYSTEM FUNCTIONS
4.0 Introduction 4.1
4.1 Functional Description, General 4.1
4.2 Weld Library and Description 4.3
4.3 Weld Sequence 4.3
4.4 Panel Keys 4.11
4.5 Operate Mode Switch 4.14
4.6 Faults 4.14
4.7 Sensor 1,2,3 Faults 4.16
4.8 Set-Up Functions 4.16
4.9 Glossary of Abbreviations 4.17
4.10 Glossary of Terms 4.18
iii