AMI Manual KW 950-CR Doc No: AMI TM950-CR
Manual KW950-CR Iss03 Rev03.doc
8
Specification
INPUT 1: NMEA 0183 valid GPS sentences..
INPUT 2: Stepper 20 to 70 volt DC, including rectified DC and AC types
Synchro 360:1, 20 to 115v reference, 20 to 90v phase
NMEA 0183 heading data
OUTPUTS: NMEA 0183, 5v RS422 & RS232 compatible 4800 baud. (8, N, 1).
Time UTC, Position, Heading, Rudder, Speed and Course Over Ground, Date .
07:45:00 utc 51 30.521 N 003 23.456 W 009
o
-35 12.0 Kts 012 cog 18:01:11
CONTROLS: Three switches to align the NMEA heading, and set output brightness.
DISPLAY: Red led 7 segment digits 14mm high, and a 4 segment bar
POWER: 9 to 32 volts DC at < 5 watts
HOUSING: DIN case 144 x 72 x 144 deep, with cable glands on rear panel.
To Next Page
Loading...
