Amibot Prime - Cleaning Sensors and Wheels; Cleaning Charging Poles; Cleaning Suction Passage and Dust Sensor

Product Maintenance
3. Cleaning Sensors and Wheels
Slightly wipe all the sensors and wheels, as marked in figure below, with soft cleaning cloth or tool.
4. Cleaning Charging Poles
Clean the charging poles, as marked in figure below, with soft cleaning cloth or tool.
5. Cleaning Suction Passage and Dust Sensor
Clean the suction passage and dust sensor, as marked in figure below, with soft cleaning cloth
or tool.
Note:
Please don't let the sensors get wet by water, thinner etc.
14