18
The residual heat indicator
Once a hot cooking zone is switched o, „H” is displayed on the relevant cooking zone’s
display to warn that the „cooking zone is still hot!”
Do not touch the cooking zone
at this time owing to the risk of
burns from residual heat, and do
not place on it any objects sensi-
tive to heat!
When the residual heat indicator goes out,
cooking zone can be touched, however
keep in mind that it may still be warmer than
ambient temperature.
The „H” residual heat indicator
is not displayed during a power
outage. However, cooking zones
may still be hot!
Important!
If the appliance is switched on
after being reconnected or when
electric power is restored after a
power outage, a short self-test
will be carried out and „H” residu-
al heat indicator is displayed. „H”
residual heat indication will be
shown on a cooking zone display
for 45 to 60 minutes. The time re-
sidual heat indication is display-
ed is not based on temperature
measurement but on how long
cooking zone operated. After a
power failure, the highest possi-
ble temperature and the longest
cooling time are assumed, hence
the extended time the indication
is displayed.
This does not aect appliance
operation.
OPERATION
To Next Page
Loading...
Need help?
General
