To Next Page

To Previous Page

OPERATION AND FUNCTIONS

Controlpanel(Fig.10).

1. Bulb cover

2. Temperature knob (thermostat)

Temperatureadjustment

Turning the knob to a di󰀨erent setting changes the temperature in the fridge-freezer.

Available knob settings:

• appliance switched o󰀨 - OFF/0 setting

• maximum temperature - 1 setting

• optimal temperature - 2-5 setting

• minimum temperature - 6 setting

Donotputfoodintothefridgefreezerbefo-

reithasreacheditsoperatingtemperature,

whichtakesminimum4hours.

Temperatureinsidethefridge/freezerchamber

Do not change the temperature settings due to the change in the season of the year. The ambient tem-

perature increase will be detected by the sensor and the compressor will be switched on automatically

for a longer period of time in order to maintain the temperature set inside the chambers.

Minorchangesintemperature

The slight changes in temperature are perfectly normal and may occur, for instance during the storage

of great quantities of fresh products in the fridge, or when the door is open for a longer period of time.

This will not a󰀨ect the condition of the stored foodstu󰀨, and the temperature will quickly return to its set

value.

Replacethelightbulb*

● Set the knob to „OFF”, then unplug the appliance.

● Remove the bulb cover.

● Replace the bulb with one having identical parameters as the bulb factory pre-installed in the ap-

pliance (E14 thread, 220-240V, max 10W, maximum dimensions: diameter 26 mm, length 55 mm).

● Replace the bulb cover.

Bulbsofahigherorlowerpowershouldnotbeused,onlyusebulbsofthespecicationgiven

above.

Thelightbulbmustnotbeusedforroomillumination.

* Applicable to appliances factory designed for incandescent lighting, and selected appliances equip-

ped with LED lighting in the form of a E14 thread light bulb.

Amica UM130.3 AA User Manual

Other manuals for Amica UM130.3 AA