30 Amico Beds Corporation
Control Boxes with Battery Back Up Only
We recommend you to discharge the batteries as little as possible to optimize the battery life. The discharging time and
the level of the battery capacity depends on the load characteristics of the application and the way in which the battery
is used.
WARNING: It is not prohibited to use batteries that are not from LINAK’s product range as this will result in
overloading LINAK’s battery charger.
If replacement batteries are required, please contact Amico Beds CSR for support. (See “Replacement Parts List” for part
number)
Specifications are subject to change without prior notice
LINAK SALES BACK-UP
1st edition rev. 2001-03-01
To Next Page
Loading...
