A113X1 Development Kit User Guide
5.0 (2018-05-22) AMLOGIC, Inc. Proprietary
8
c)Install the libusb driver. In your Ubuntu pc, use 'lsusb' to see whether the Ubuntu is already installed
1. If you see device like this: 'ID 1b8e:c003 Amlogic. Inc.', Now your PC already can use the
2. If you fail to see Amlogic worldcup device string '1b8e:c003...', you can install it using
command 'sudo apt-get install libusb-dev'.
3. Check driver if it has been correctly installed.
Step 2. Make sure plug-out and plugin the usb cable to let worldcup usb device probed by Ubuntu:
a)Use 'lsusb' to see if Amlogic device '1b8e:c003...' recognized.
b)In Ubuntu 12.04, a device called '/dev/worldcup' as descripted in you udev rules
Step 3. Connect the board to your linux pc with a usb cable, set baord to USB mode, if you have installed
properly the update binary tool, your linux machine should detect a new usb device called
Step 4. Execute thefollowing command: $ flash-tool.sh --img=/path/to/aml_upgrade_package.img --
parts=all --wipe --soc=axg
Note:
If you want to get more detail information,please reference DOC ““Amlogic Update USB Tool User Guide” and
README for flash-tool-v4.7.
Connect development board with a 12V power adapt and switch on, The System Led will display green after
power on success.
After the device is upgraded, WiFi will auto enter AP mode. You can use web to send SSID and Password to
device, it will connect to WiFi AP.
Step 1. Open WLAN on your phone or your tablet PC, you can find AP which name is “amlogic-audio-xxxxx”,
please to connect it, password is “12345678”.
Step 2. Open web app to setup WiFi, please input the URL : 192.168.2.1 ,and then click search button, you
will find the following picture.
Step 3. Scanning nearby wifi ssid, clicks on “WIFI-LIST”, set password and connect it.
To Next Page
Loading...