Ammann Cummins ASC110 - Page 85

81ASC 110
ASC246
8
ASC247
12
12
ASC249
11
10
13
ASC248
3
WORKSHOP MANUAL
Loosen nuts (63-25).
Remove nuts (63-25) using wrench no. 8.
The nut reassemble torque: 260 Nm
Remove clamps of the pin, press out the pins (63-12) using jack,
see Fig.
Use crane to set hub (63-3) aside.
Remove covers (63-10), (63-11), and spreaders (63-13).