30
Maintenance
Revision: 1 – Nov 2019 Doc No: OMMB00301
Table 7 provides the part numbers for spare seal kits, containing the
required seals to maintain a complete valve.
Size
1.1/2” 46342X151 46342X152 46342X153 46342X154 46342X155 46342X156
2” 46342X201 46342X202 46342X203 46342X204 46342X205 46342X206
2.1/2” 46342X251 46342X252 46342X253 46342X254 46342X255 46342X256
3”
3BO,3BR
46342X301 46342X302 46342X303 46342X304 46342X305 46342X306
3”
33BO, 33BR
46342X331 46342X332 46342X333 46342X334 46342X335 46342X336
4”
4BOA,4BOB
4BOC,4BOD
46342X401 46342X402 46342X403 46342X404 46342X405 46342X406
4”
4BOR,4BOS
4BRR,4BRS
46342X411 46342X412 46342X413 46342X414 46342X415 46342X416
5” 46342X501 46342X502 46342X503 46342X504 46342X505 46342X506
6” 46342X601 46342X602 46342X603 46342X604 46342X605 46342X606
8” 46342X801 46342X802 46342X803 46342X804 46342X805 46342X806
5” Steel 46342X511 46342X512 46342X513 46342X514 46342X515 46342X516
6” Steel 46342X611 46342X612 46342X613 46342X614 46342X615 46342X616
8” Steel 46342X811 46342X812 46342X813 46342X814 46342X815 46342X816
Table 7 - Seal kit part numbers
Note that as of 2010, 4” and 5” B valves, and as of 2011, 6” and 8” B
Valves, use ‘O’ rings to seal the upper and lower housing. The seal
kits for these valves contain the original type gasket and the ‘O’ rings
to suit both types of sealing configuration.
To Next Page
Loading...
