8
Description
Revision: 1 – Nov 2019 Doc No: OMMB00301
3.3 Valve Selection
A wide range of valve sizes and materials of construction are available,
covering the applications in Section 3.2. An AMOT B Valve datasheet
containing information on selection of the appropriate valve type is
available, contact AMOT for a copy.
It is the responsibility of the end user to ensure suitability of the valve
with its intended use. The valve, element, and seal materials in particular
should be carefully selected to ensure compatibility with the process fluid
and the installation.
For further help in selecting the correct valve for the application, contact
AMOT (contact details available on the back cover of this manual).
3.4 Identification of Model Number
Valve Size
Valve Model
BO Flanged (2 1/2" to 8" only)
BC Flanged 'T' configuration (1 1/2" and 2" only)
BF Flanged 'F' configuration (2" only)
Screwed high pressure (1 1/2" and 2" only)
BP
Special ST.ST with Manual Override (
detail)
BQ Special ST.ST B Valve (Contact AMOT for detail)
Valve Material
Valve Material
A Aluminium (not 8 and 33)
B Bronze (not 33)
D Ductile iron
S Steel (2" to 8" only)
R Stainless steel (2" to 8" only)
Port Connection
Port Connection
A Flanged PN6
B Flanged PN10
F Flanged ANSI 125 lb (cast iron, bronze and ductile only)
J Flanged ANSI 150 lb (steel and stainless steel only)
H Flanged ANSI 300 lb (steel and stainless steel only)
L Flanged JIS 10k
P Flanged JIS 5k
T Threaded NPT (1 1/2" and 2BO only)
U Threaded BSP (PL) (1 1/2" and 2BO only)
Control Temperature (°F)
…continued overleaf