www.amp-research.com
3/4
IM75406 rev 01.02.12
5
9
8
10
11
12
13mm
7
Using a 13mm Socket with extension, align bolts
with threaded plate. Tor que to 16ft-lbs.
Set bolts into lower lateral mount. Set bracket
into place and use provided hardware to bolt
bracket to inner bed brace.
Set linkage into position, tighten bolts using
15mm Socket. Tor que to 20 ft-lbs.
Tighten bracket bolt with 13mm socket and
wrench. Torque to 16 ft-lbs.
13mm
13mm
Locate the step pad in the following positions
per application. Crew Cab 1500 offset step pad
rearward. All other applications mount step pad in
center position.
Verify step pad alignement to body line of vehicle.
To Next Page
Loading...
