Do you have a question about the AMP Research BedStep 75315-01A and is the answer not in the manual?
Category | Automobile Accessories |
---|---|
Part Number | 75315-01A |
Finish | Black Powder Coat |
Weight Capacity | 300 lbs |
Installation | Bolt-On |
Product Name | AMP Research BedStep |
Product Type | Truck Bed Step |
Mounting Location | Rear of Truck Bed |
Material | Aluminum |
Install bracket to truck and torque nuts to 59 ft-lbs / 80Nm.
Insert threaded bracket into bumper and secure with bolt, using slotted end.
Install bracket to upper bed panel using provided bolts and nuts, torque to 16 ft-lbs / 22Nm.
Install step pad, ensuring the offset pad is positioned to the rearward.
Torque 3 PT screws to 5 ft-lbs / 6Nm. Note: Overtightening may damage the step pad.
Details on how to deploy and retract the BedStep using foot operation.
Guide on cleaning and care for the step pad and linkage arms.
Information on the product's three-year limited warranty terms and claim process.
Crucial safety warning regarding proper installation and usage.