AMP Research BedStep AMP 75314-01A

Need help?

Do you have a question about the AMP Research BedStep AMP 75314-01A and is the answer not in the manual?

Summary

Initial Bracket Installation Steps

Torque Nuts for Bracket Installation

Install bracket to truck, torquing nuts to 59 ft-lbs / 80Nm.

Assemble Bumper Bracket

Insert threaded bracket into bumper and assemble with bracket using supplied bolt.

Remove Factory Nuts

Prepare mounting points by removing existing factory nuts.

Secondary Bracket and Step Pad Installation

Mount Upper Bed Panel Bracket

Install bracket to upper bed panel, torquing bolts to 16 ft-lbs / 22Nm.

Install and Torque Step Pad Screws

Install step pad, offsetting it rearward and torquing screws to 5 ft-lbs / 6Nm.

Overtightening Warning for Step Pad

Caution against overtightening screws to prevent damage to the step pad.

BedStep Operation and Safety

BedStep Operation Guide

Learn how to deploy, retract, and use the BedStep, noting its load capacity and use of handholds.

BedStep Maintenance and Cleaning

Instructions for washing the step pad and linkage arms and advice on preventing slipping.

Driving Safety and Storage

Important reminder to always stow the BedStep in the retracted position when driving.

The AMP Research BedStep is an aftermarket accessory designed for Chevy Silverado and GMC Sierra 1500 trucks from 2014-2015, identified by part number AMP 75314-01A. This foot-operated step provides convenient access to the truck's cargo bed and is designed for easy deployment and retraction.

Function Description:

The BedStep is a retractable step that attaches to the rear bumper and bed panel of the truck. Its primary function is to provide a stable platform for users to step on when accessing the truck bed, making loading and unloading easier and safer. The step is deployed and retracted using foot pressure.

Important Technical Specifications:

Compatibility: Chevy Silverado / GMC Sierra 1500, model years 2014-2015.
Max Load Capacity: 300 lbs.
Installation Hardware:
- Threaded bracket (19-03963-90)
- Bracket (19-03961-90)
- Bracket (19-03962-90)
- Step pad
- Various bolts and nuts of different sizes.
Torque Specifications:
- Nuts securing the main bracket to the truck: 59 ft-lbs / 80 Nm (using 18mm socket).
- Bolts securing the upper bed panel bracket: 16 ft-lbs / 22 Nm (using 13mm socket).
- PT screws for the step pad: 5 ft-lbs / 6 Nm (using T25 Torx wrench).
Tools Required for Installation: Torque wrench, 18mm socket, 13mm socket, T25 Torx wrench.

Usage Features:

Foot-Operated Deployment: To deploy the BedStep, the user presses down with their foot on the forward outside corner of the step pad.
Foot-Operated Retraction: To retract the BedStep, the user gently kicks the underside of the step pad.
Safety Recommendation: Always use appropriate handholds when stepping up to or down from the truck's cargo bed.
Driving Safety: The BedStep should always be stowed in the retracted position when driving to prevent damage or interference.

Installation Process:

The installation involves several steps, requiring specific tools and torque settings:

Remove Factory Nuts: Begin by removing existing factory nuts from the bumper area.
Install Threaded Bracket: Insert the threaded bracket (19-03963-90) into the bumper.
Assemble Main Bracket: Assemble bracket (19-03961-90) with the supplied bolt, ensuring the slotted end of the bracket is used at the bolt.
Mount Main Bracket: Install the assembled bracket to the truck and torque the nuts to 59 ft-lbs / 80 Nm using an 18mm socket.
Install Upper Bed Panel Bracket: Mount bracket (19-03962-90) to the upper bed panel. The slotted side of this bracket should face the bed panel. Use the provided bolts and nuts and torque them to 16 ft-lbs / 22 Nm using a 13mm socket.
Install Step Pad: Position the step pad with the offset side facing rearward.
Secure Step Pad: Torque the three PT screws to 5 ft-lbs / 6 Nm using a T25 Torx wrench. A note warns against overtightening these screws to prevent damage to the step pad.

Maintenance Features:

Cleaning: The step pad surface and linkage arms can be cleaned with mild soap and water. A soft brush or sponge can be used to dislodge mud, dirt, or accumulated road grime. After cleaning, rinse with fresh water.
Preventing Slipping: To maintain grip and prevent slipping, avoid applying waxes, lubricants, or protectants like Armor All® to the step surface.

The AMP Research BedStep is designed to be a durable and convenient addition to compatible trucks, enhancing accessibility to the cargo bed while maintaining a sleek, retractable design.