AMP Research BedStep AMP 75308-01A

Need help?

Do you have a question about the AMP Research BedStep AMP 75308-01A and is the answer not in the manual?

Summary

Installation Steps

Parts and Initial Assembly

Illustrates parts and tools required for the initial stages of installation, including component identification.

Torque Specifications and Tool Usage

Details specific torque values and appropriate tools like deep sockets and torque wrenches for secure mounting.

Driver Side Bumper Mounting

Provides visual guidance for mounting the BedStep bracket to the driver side of the vehicle's bumper.

Vehicle Mounting Details

Shows specific connection points and hardware for attaching the BedStep assembly to the vehicle frame.

Frame Attachment and Torque

Details the process of attaching the main bracket to the vehicle frame, including the required torque setting.

Step Pad Attachment

Illustrates how to securely attach the BedStep pad to the deployed linkage arms using specified hardware.

Final Step Pad Securing

Shows the final attachment of the step pad, emphasizing the correct torque to avoid damage.

Bumper Clearance Check

Visual guide for checking clearance between the installed BedStep and the vehicle's bumper.

Operation

BedStep Deployment and Retraction

Explains the foot-operated mechanism for deploying and retracting the BedStep, including max load capacity.

Safe Usage Guidelines

Advises using handholds when stepping onto or off the truck bed for user safety.

Maintenance Tips

Cleaning Procedures

Recommends washing the step pad and linkage arms with mild soap and water using a soft brush or sponge.

Slipping Prevention

Warns against using waxes, lubricants, or protectants like Armor All on the step surface to prevent slipping.

Warranty and Safety Information

Limited Warranty Details

Covers warranty terms, claim procedures, exclusions, and duration (three years from purchase).

Important Warning

Emphasizes following installation instructions precisely to prevent dangerous situations and ensuring proper installation.

The AMP Research BedStep is an aftermarket accessory designed for Chevy Silverado and GMC Sierra 2500/3500 HD trucks from 2011-2014, providing an additional step for easier access to the truck bed. The part number for this specific BedStep is AMP 75308-01A.

Function Description:

The BedStep is a foot-operated, deployable and retractable step that mounts to the rear bumper of the truck. It is designed to assist users in stepping up to or down from the truck's cargo bed, enhancing convenience and safety, especially for taller trucks or when carrying heavy loads. The step deploys with a nudge of the user's foot and retracts similarly.

Important Technical Specifications:

Compatibility: Specifically designed for Chevy Silverado / GMC Sierra 2500/3500 HD trucks, model years 2011-2014.
Max Load Capacity: The BedStep has a maximum load capacity of 300 lbs.
Materials: The components include various fasteners, brackets, and the step pad itself.
- Fasteners:
  - 19-03560-90 (Quantity: 2)
  - 19-03237-90 (Quantity: 2)
  - 19-03593-90 (Quantity: 2)
  - 19-03767-90 (Quantity: 2)
  - 15-03507-90 (Quantity: 2)
  - 15-03414-91 (Quantity: 2)
  - 16-03780-90 (Quantity: 2)
- Main Bracket: 20-03435-10 (Quantity: 1)
Torque Specifications:
- Main bracket mounting bolts (to bumper): 59 ft-lbs / 80 Nm. Requires a 21mm deep socket.
- Step pad mounting bolts (to linkage): 6 ft-lbs / 8 Nm. Requires an 8mm socket and a 3/16" hex key.
- Bumper mount bolts (to frame): 33 ft-lbs / 44 Nm. Requires an 8mm socket and a 3/16" hex key.
Tools Required for Installation:
- Torque wrench
- 21mm deep socket
- 8mm socket
- 3/16" hex key
- 24mm deep socket (for bumper removal/reinstallation, not explicitly stated for BedStep but implied by bumper mount instructions)

Usage Features:

Foot-Operated Deployment: To deploy the step, the user presses down on the forward outside corner of the step pad with their left foot.
Foot-Operated Retraction: To retract the step, the user gently kicks the underside of the step pad.
Safety Recommendation: Users should always use appropriate handholds when stepping up to or down from the truck's cargo bed to maintain stability.
Driving Safety: It is crucial that the BedStep always be stowed in the retracted position when the vehicle is being driven to prevent damage or potential hazards.

Maintenance Features:

Cleaning: The step pad surface and linkage arms can be cleaned using mild soap and water. A soft brush or sponge is recommended to dislodge any mud, dirt, or accumulated road grime. After cleaning, rinse thoroughly with fresh water.
Slipping Prevention: To prevent slipping, avoid applying waxes, lubricants, or protectants (such as Armor All®) to the step surface. These products can reduce friction and make the step hazardous.

Installation Notes:

The installation process involves mounting the BedStep to the driver's side bumper. This typically requires removing or loosening the bumper to access the mounting points. The manual provides a step-by-step visual guide for installation, including specific torque values for different fasteners to ensure secure and safe attachment. Professional installation is recommended to ensure correct fitment and operation.

Warranty and Support:

Warranty: The product comes with a three-year limited warranty from the date of purchase, covering defects in material and workmanship under normal use and proper maintenance. Remedies are limited to repair or replacement of defective items.
Customer Support: AMP Research Tech Support is available Monday - Friday, 6:00 AM - 5:00 PM PST at 1-888-983-2204 (Press 2) for installation and warranty issues.
Safety Warning: It is critical to read and precisely follow the provided instructions during installation. Failure to do so could create a potentially dangerous situation for vehicle occupants. After installation or reinstallation, all components should be re-checked to ensure proper and secure fitment.

The BedStep is designed and manufactured by AMP Research®, with several patents covering its design and functionality, including Patent Numbers 6,830,257; 6,641,158; 6,834,875; 6,938,909; 6,942,233; 7,007,961; 7,055,839; 7,163,221; 7,367,574; 7,380,807; 7,398,985; 7,413,204; 7,487,986. Other US and Worldwide patents are pending. The product is Made in USA.