AMP Research BedXTender HD Max 74840-00A User Manual

rev 05.14.19
1/6
www.amp-research.com
ASSEMBLY & INSTALLATION GUIDE
1
APPLICATION YEAR
RAM DT 2019
Remove contents from box and check for damage.
Verify all parts against parts list.
Read and understand instructions completely before attempting assembly
and installation.
INSTALLATION TIME
SKILL LEVEL
1= Easy
2 3
4
PART #
74840-00A (Silver) 74840-01A(Black)
TOOLS REQUIRED
Phillips screw driver
Torx T-25 driver
Power drill
5/32” drill bit
Center punch
Supplied templates
Soapy Water
BEDXTENDER HD™ shown assembled and installed on truck.
1 Hour
Invented, engineered and manufactured exclusively by AMP Research in the USA. May be covered by one of the
following patents:
5,700,047; 6,113,173; 6,402,215; 6,805,392; 7,063,366; 7,393,035; 7,654,598; 7,681,935; 7,841,638
3-Year Limited Warranty
WARRANTY

AMP Research BedXTender HD Max 74840-00A Specifications

General

Part Number	74840-00A
Category	Automobile Accessories
Material	Aluminum
Finish	Black Powder Coat
Installation	Bolt-on
Extension Length	Up to 2 feet
Warranty	Limited lifetime warranty

Summary

Parts List and Hardware Identification

Universal Mounting Bracket Installation

Bed X-Tender Assembly

BedXTender HD Operation

Placing Pivot Pins

Place BEDXTENDER pivot pins into mounting brackets with tailgate open. Rotate to 45 degrees until it drops.

Contain Cargo

Flip BEDXTENDER out to contain cargo. CAUTION: 200lb max load on open tailgate. Distribute cargo evenly.

Secure for Driving

Lock strap buckles into truck's tailgate latches before driving. Pull straps to ensure proper locking.

Secure Smaller Cargo

Flip BEDXTENDER forward and close tailgate to keep smaller cargo safe and organized.

AMP Research Limited Warranty