DEFAULT SETTINGS
The default settings for your Dual Band Repeater are listed here. If for some reason you need to return your
Dual Band Repeater back to default settings, hold down the Reset button on the back panel for 10 seconds.
The Dual Band Repeater will reset back to factory settings as listed below:
IP Address: 192.168.1.240
Web Menu Access: http://setup.ampedwireless.com
2.4GHz Extended Network SSID: Amped_Rep_2.4GHz
Wireless Security Key (WPA/WPA2 Mixed Mode): wireless
5.0GHz Extended Network SSID: Amped_ Rep_5.0GHz
Wireless Security Key (WPA/WPA2 Mixed Mode): wireless
To Next Page
Loading...
