Need help?Do you have a question about the Amprobe AMP-320 and is the answer not in the manual?
General| Type | Digital Multimeter |
|---|---|
| Display | LCD |
| Max Voltage (AC/DC) | 600V |
| Battery | 9V |
| Continuity | Yes |
| Display Digits | 3.5 |
| Safety Rating | CAT III 600V |
| Voltage Range (AC) | 600V |
| Voltage Range (DC) | 600V |
| Current Range (DC) | 10A |
| Resistance Range | 40MΩ |
| Capacitance Range | 100μF |
| Frequency Range | 10Hz to 400Hz |
Crucial safety warnings and precautions before operating the multimeter.
How to measure AC and DC voltage using the clamp meter.
Procedure for non-contact voltage detection (NCV) with the clamp meter.
Steps to measure AC and DC current using the clamp meter.
Method for accurately measuring low AC or DC currents in small conductors.
How to perform microamp DC measurements, often for HVAC sensors.
Instructions for measuring resistance, continuity, and testing diodes.
Guide on measuring capacitance and temperature with probes.
How to perform 3-phase motor and mains rotation tests.
Explanation of the auto power-off feature and its conditions.
Detailed electrical performance data, ranges, and accuracies for the meter.
Step-by-step guide for replacing the meter's batteries.
To Next Page
