Need help?Do you have a question about the Amprobe ACDC-100 TRMS and is the answer not in the manual?
General| Type | Clamp Meter |
|---|---|
| AC Voltage Range | 600 V |
| DC Voltage Range | 600 V |
| Display | LCD |
| Battery | 2 x 1.5 V AAA |
| Continuity | Yes |
| Diode Test | Yes |
| Safety Rating | CAT III 600 V |
| Capacitance Range | 100 µF |
| TRMS | True |
| Temperature Measurement | -4°F to 1400°F (-20°C to 760°C) |
| Dimensions | 210 mm x 75 mm x 36 mm (8.3 in x 3.0 in x 1.4 in) |
| Weight | 200 g (0.4 lb) |
Details on how to send test tools for warranty or non-warranty repair or calibration.
Procedure for returning defective test tools for exchange during the warranty period.
Instructions for sending units for non-warranty repair in the US and Canada.
Information on how European non-warranty units can be replaced by distributors.
Important warnings and precautions to follow before and during measurements.
General overview of the Amprobe ACDC-100 Series Clamp-on Multimeter.
Details on what items are included in the product packaging.
How to position the conductor within the jaws at indicated marks for maximum accuracy.
Describes the HOLD feature to freeze the display and MAX feature for measured maximum value.
Details how to use the HOLD button to freeze the display.
Details how to use the HOLD button for 1 second or more to activate MAX HOLD feature.
Allows offsetting meter measurements using a displayed reading as a reference value.
Explains how to enable/disable backlight and step through functions.
How to select manual-ranging mode and resume auto-ranging.
Describes the automatic power-down feature and how to disable it.
Step-by-step instructions for measuring DC voltage using the meter.
Step-by-step instructions for measuring AC voltage using the meter.
Step-by-step instructions for measuring AC current using the clamp-on jaw.
Step-by-step instructions for measuring DC current using the clamp-on jaw.
Step-by-step instructions for measuring resistance.
Steps for performing a continuity test, including the audible tone indication.
Step-by-step instructions for testing diodes.
Step-by-step instructions for measuring capacitance.
Instructions and warnings for replacing the meter's batteries.
General technical specifications for the Amprobe ACDC-100 series.
Electrical characteristics and parameters of the meter.
Detailed accuracy and range specifications for DC Voltage measurements.
Detailed accuracy and range specifications for AC Voltage measurements.
Accuracy and range specifications for resistance measurements.
Specifications for the continuity testing function.
Specifications for the diode testing function.
Accuracy and range specifications for capacitance measurements.
Accuracy and range specifications for DC current measurements using the clamp.
Accuracy and range specifications for AC current measurements using the clamp.
To Next Page
