Need help?Do you have a question about the Amprobe 37XR-A and is the answer not in the manual?
General| Data hold | Yes |
|---|---|
| Product type | Digital multimeter |
| Product color | Red |
| Frequency range | 0.1 - 10000 kHz |
| AC voltage range | 1 - 750 V |
| DC current range | 0.1 - 10 A |
| DC voltage range | 1 - 1000 V |
| Measuring category | CAT II 1000V, CAT III 600V |
| Statistic function | Average, Maximum, Minimum |
| Placement supported | Handheld multimeter |
| Resistance resolution | 40 Ω |
| Resolution (frequency) | 0.1 Hz |
| Resolution (DC current) | 0.1 µA |
| Resolution (DC voltage) | 0.1 mV |
| Display digits | 4 digits |
| Battery type | 9V |
| Power source | Battery |
| Battery voltage | 9 V |
| Maximum storage altitude | 2000 m |
| Storage temperature (T-T) | -20 - 60 °C |
| Operating temperature (T-T) | 0 - 45 °C |
Weight and Dimensions| Depth | 60 mm |
|---|---|
| Width | 195 mm |
| Height | 92 mm |
| Weight | 400 g |
Key symbols and their meanings used throughout the manual for safety and operational context.
Step-by-step guide for measuring DC voltage using the multimeter.
Procedure for measuring AC voltage, highlighting true-rms capabilities.
Detailed instructions for measuring direct current with the multimeter.
Steps for measuring AC current, emphasizing true-rms accuracy.
How to measure electrical resistance using the multimeter.
Procedure for checking circuit continuity with the multimeter's audible tone.
Method for testing the forward voltage drop of diodes.
Common issues and checks for resolving improper multimeter operation.
Specifications for DC voltage measurement, including ranges, resolution, and accuracy.
Specifications for AC voltage measurement, true-rms, frequency response, and overload protection.
To Next Page
