Need help?Do you have a question about the Amprobe 5XP-A and is the answer not in the manual?
General| Display digits | 4 digits |
|---|---|
| Battery type | 9V |
| Power source | Battery |
| Battery voltage | 9 V |
| Battery low indication | Yes |
| Number of batteries supported | 1 |
| Product type | Digital multimeter |
| Product color | Red |
| AC voltage range | 0.2 - 750 V |
| DC current range | 0.002 - 0.2 A |
| DC voltage range | 0.2 - 1000 V |
| Measuring category | CAT III 300V |
| Statistic function | Average, Maximum, Minimum |
| Placement supported | Handheld multimeter |
| Battery test mode range | 1.5 - 9 V |
| Resolution (AC current) | 0.1 µA |
| Resolution (AC voltage) | 0.1 mV |
| Maximum storage altitude | 2000 m |
| Storage temperature (T-T) | -20 - 60 °C |
| Operating temperature (T-T) | 0 - 50 °C |
Weight and Dimensions| Depth | 32 mm |
|---|---|
| Width | 155 mm |
| Height | 72 mm |
| Weight | 210 g |
Details on returning test tools for warranty or non-warranty repair or calibration, including required information.
Procedure for returning defective test tools for exchange during the warranty period.
How to manually select and lock measurement ranges or use the autoranging feature.
Understanding and resolving overload indications on the multimeter display.
Step-by-step guide for measuring DC voltage with the multimeter.
Steps to check if the meter is operating improperly.
Instructions for replacing the battery and fuses in the multimeter.
To Next Page
