Need help?Do you have a question about the Amprobe 30XR-A and is the answer not in the manual?
General| Type | Digital Multimeter |
|---|---|
| Model | 30XR-A |
| Brand | Amprobe |
| Display | LCD |
| Display Digits | 3.5 |
| Max Voltage Measurement (AC/DC) | 600V AC/DC |
| Max Current Measurement | 10A |
| Resistance Measurement | 40 MΩ |
| Data Hold | Yes |
| Backlight | No |
| Continuity Test | Yes |
| Diode Test | Yes |
| Battery Test | Yes |
| Safety Rating | CAT III 600V |
| Battery Type | 9V |
| Low Battery Indicator | Yes |
| Auto Power Off | Yes |
| DC Current Ranges | 10A |
| Resistance Ranges | 40MΩ |
| DC Voltage Ranges | 600V |
| AC Voltage Ranges | 600V |
Ensure the multimeter is operational and the battery is good before commencing measurements.
Handle overload indications by selecting a higher range or identifying the issue.
Step-by-step guide for measuring DC voltage with the multimeter.
Step-by-step guide for measuring AC voltage with the multimeter.
Safety precautions and preparation steps before measuring current.
Step-by-step guide for measuring DC current with the multimeter.
Step-by-step guide for measuring AC current with the multimeter.
Step-by-step guide for measuring resistance with the multimeter.
Steps for testing circuit continuity using the audible tone feature.
Procedure for testing diode forward voltage drop.
How to perform non-contact voltage detection.
Guide for testing the voltage of 1.5V and 9V batteries.
Alerts users to potential dangers from incorrect lead connections.
Instructions for capturing minimum and maximum readings during measurements.
Guide on how to freeze and retain a measurement reading.
Instructions for safely cleaning the multimeter's exterior.
Steps to diagnose and resolve common operational issues.
Procedures for safely replacing the unit's battery and fuses.
To Next Page
