Need help?Do you have a question about the Amprobe AMP-330 and is the answer not in the manual?
General| AC voltage | 0 - 1000 V |
|---|---|
| DC voltage | 0 - 600 V |
| Low pass filter | Yes |
| DC current (max) | 600 A |
| Resistance (max) | 60000 Ω |
| Resistance (min) | 0 Ω |
| Measuring category | CAT IV 600V |
| Battery type | AA |
| Number of batteries supported | 2 |
| Clamp opening | 51 mm |
| Product color | Black, Red, Yellow |
| Operating altitude | 0 - 2000 m |
| Storage temperature (T-T) | -20 - 60 °C |
| Operating temperature (T-T) | -10 - 50 °C |
Weight and Dimensions| Depth | 44 mm |
|---|---|
| Width | 94 mm |
| Height | 258 mm |
| Weight | 420 g |
Essential warnings and precautions for safe operation and to avoid injury.
Lists standards and directives the meter complies with for safety and EMC.
Lists the items included in the product's shipping carton.
Step-by-step guide for measuring AC and DC voltage using the clamp meter.
Instructions for performing non-contact voltage detection with the meter.
Procedure for measuring AC and DC current using the clamp meter's jaws.
Method for accurately measuring low AC or DC currents in small conductors.
Guide for measuring microamps, primarily for HVAC flame sensor testing.
Steps for testing resistance, continuity, and diode functionality.
How to measure capacitance and temperature using the meter and probes.
Procedure for checking phase rotation of motors and mains supply.
Details on how and when the auto power off feature activates.
Specifications for DC voltage measurement, including range and accuracy.
Specifications for AC voltage measurement with a digital low-pass filter.
Specifications for combined DC+AC voltage measurement with filter.
Details on the PEAK-rms measurement function response time.
Information on the CREST (peak-hold) measurement accuracy and changes.
Specifications for continuity testing, including audible threshold and response time.
Specifications for resistance measurement, including range and open circuit voltage.
Specifications for capacitance measurement, including range and accuracy.
Specifications for diode testing, including range, accuracy, and test current.
Specifications for DC microamp measurement, including range, accuracy, and burden voltage.
Specifications for temperature measurement in Celsius and Fahrenheit.
Specifications for precise low current AC measurements.
Specifications for precise low current DC measurements.
Specifications for precise low current DC+AC measurements.
Specifications for AC current measurement, including range and accuracy.
Specifications for DC current measurement, including range and accuracy.
Specifications for DC+AC current measurement, including range and accuracy.
Specifications for frequency measurement, including function, sensitivity, and range.
Specifications for 3-phase rotation measurement for motors and mains.
Specifications for Non-Contact Voltage Detection, including voltage ranges.
Instructions on how to safely replace the meter's batteries.
To Next Page
