R Record Mode (cont’d.)
Step 4 - Start, Stop Recording - Press the START button. This will take you to the confirmation
screen.
• If you press the START button again you will start a recording session.
W
ARNING: All previously stored data in the memory will be erased. If you want to
cancel and return to the RECORD selection screen, press NO (middle right black button).
Previously recorded data will remain in the memory.
• To start a recording session, press START. Remember, all previously recorded data
will be lost.
• To terminate the recording session, press STOP button.
NOTE:
YOU WILL TERMINATE THE RECORDING SESSION BY
PRESSING
ON/OFF BUTTON.
At this stage you can view data being recorded by pressing view button. Please refer to the
next section on Page 21.
Page 19
To Next Page
Loading...