R CT Set-up
Check if the type of CT’s you are using matches the set-up on the DM-II PRO.
To set up the ACF-3000 itself, please refer to the ACF-3000 DM manual.
To change a CT set-up on the DM-II
Step 1
- Simply highlight CT in Setup screen using up/down arrows on the keypad and press
ENTER (red square).
Step 2
- Using same arrow keys, highlight desired CT.
Step 3
- Press ENTER again.
PROPER SET-UP
TYPE OF CURRENT TRANSDUCERS RANGE OF THE DM-II
DM-CT or Standard CTs 0-1000 amps CT DM-CT
DM-CT CE shipped with every DM-II PRO
ACF-3000DM Optional flexible CTs set-up 30-300 amps CT ACF3000 300
ACF-3000 DM Optional flexible CTs 300-3000 amps CT ACF3000 3000
Page 8
To Next Page
Loading...