EasyManua.ls Logo

Amprobe PM-60 - Page 18

Amprobe PM-60
22 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
12
Square Wave (5 Hz ~ 1KHz)
Sensitivity: 1.5Vp-p
Overload protection: 600V rms.
Function Ranges Resolution Accuracy
ACA
400.0µA 0.1µA
± (1.5%+ 5 D)
4.000mA 0.001mA
Frequency Response: 50 ~ 500Hz
AC Conversion Type: AC Coupled Average Sensing, RMS
Indication.
Input Impedance: Approx. 3K
Overload protection: 600V rms.
Function Ranges Resolution Accuracy
DCA
400.0µA 0.1µA
± (0.9%+ 5 D)
4.000mA 0.001mA
Input Impedance: Approx. 3K
Overload protection: 600V rms.
DIODE TEST
Test Current: Typical. 350µA
Open Circuit Voltage: Max. 1.8V DC
Input Protection: 600V rm.
- EMC: EN61326-1.
This product complies with requirements of the
following European Community Directives: 89/ 336/ EEC
(Electromagnetic Compatibility) and 73/ 23/ EEC (Low
Voltage) as amended by 93/ 68/ EEC (CE Marking). However,
electrical noise or intense electromagnetic fields in the
vicinity of the equipment may disturb the measurement
circuit. Measuring instruments will also respond to unwanted
signals that may be present within the measurement circuit.
Users should exercise care and take appropriate precautions
to avoid misleading results when making measurements in
the presence of electronic interference.

Related product manuals