AMS CT608 - Page 16

Tel : +33 (0)3 27 94 44 44 - Fax : +33 (0)3 27 94 44 45 - @ : contact@ams-diffusion.com - www.ams-diffusion.com
AMS - Rue des Galeries - Z.A. du Chevalement - 59286 ROOST WARENDIN - France
RCS DOUAI A 451 360 382 - CODE APE 4531Z - SIRET 451 360 382 00035 - TVA FR 55 451 360 382
16
v4-102013
CAR RADIOCAR RADIO
FormHomepage
Mode activationMode activation
AeriAlAeriAl
Bluetooth microphoneBluetooth microphone
ResetReset
PairingPairing
MuteMute
ISO COnneCtOrISO COnneCtOr
RadioRadio
Guides and Methods
Help is available on :
Guides and Methods
Help is available on :
RadioRadio
2/22/2
Geographical environment :
> Mountains or valleys :
> It is sometimes preferable to choose a nearby frequency
for the required station, whose signal may be weaker
but exposed to less interference from natural elements
(mountains).
> Switch the functions on / off :
> The appliance measures the signal peak. If the signal
is weak (poor reception), the muting (Local mode)
deletes the station, because the level of the signal is
too low.
> RDS :
> In this case, the RDS system is not always adapted to these
conditions and does not perform its function, which consists in
switching to a nearby frequency. Since the signal is weak, the RDS
signal is non-existent, whereas the station can be picked up. In this
case, you can also switch off the radio’s AF function, which prevents
unwanted searches.
> Conversely, in DX mode, the radio picks up all the stations,
even if they are weak. In this case, users may think that the
radio’s reception is poor, whereas it is the station’s signal
that is too weak for quality sound.
> If the signal is weak, you can switch off the STEREO mode
for easier listening.