Overview
18
Hardware Reference Guide - NX-Series NetLinx Integrated Controllers
5. Secure the controller to the rack by using the four #10-32 screws supplied in the kit.
6. Apply power to the unit to complete the installation.
Mounting the NX-1200
Mounting options for the NX-1200 are as follows:
Rack mounting with an AVB-VSTYLE-RMK-1U, V Style Module Rack Mounting Tray (FG1010-
720)
Surface mounting with an AVB-VSTYLE-SURFACE-MNT, V Style Single Module Surface Mount
(FG1010-722)
Consult the Mounting Options for V Style Modules Quick Start Guide included with the respective mounting
kit for instructions on mounting the NX-1200. The NX-1200 also has rubber feet which you can apply to the
bottom of the unit for table-top mounting.
To Next Page
Loading...
