Safety
3
Safety
IMPORTANT
This product is not designed for making emergency telephone calls when the power fails. Alternative
arrangements should be made for access to emergency services.
Power requirements
This product requires an electrical supply of 220-240 volts, single-phase alternating current, excluding IT
installations defined in standard EN 60950.
Handset Charger Adapter
Input: 230VAC 50Hz
Output: 6VDC 150mA
Base Unit Adapter
Input: 230VAC 50Hz
Output: 6VDC 250mA
Battery requirements
The handset requires power source of two rechargeable NiMH batteries, size AAA 1.2V 550 mAh (HR10/44).
Telephone connections
The voltage on the network is classified as TNV-3 (Telecommunication Network Voltages, as defined in the
standard EN 60950). Following a power cut, the call in progress as well as the date and time settings is lost.
Hearing aid
Please note that this telephone works by sending radio signals between the base unit and the handset. These
signals may interfere with some hearing aids, causing a humming noise.
Safety precautions
•
Do not allow the handset to come into contact with liquids or moisture.
•
Do not open the handset, base unit or charger. This could expose you to high voltages.
•
Do not allow the charging contacts or the battery to come into contact with conductive materials.
•
There is a slight chance that your product could be damaged by an electrical storm. We recommend that
you unplug the product from the power supply and telephone socket during a storm.
•
Do not use the handset in an explosive hazard area such as where there is gas leaking.
•
It is recommended that this product is not used near intensive care medical equipments or by persons
with pacemakers.
• This product can interfere with electrical equipment such as answering machine, television, radio, and computers if
placed too close. We recommend that you position the base unit at least one meter from such appliances.
The marking certifies the compliance with technical regulations in accordance with the Directive
for the safety of the user, electromagnetic perturbations and for radio spectrum.
RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. Never
use non-rechargeable batteries. Use recommended type supplied with this
product. NiMH batteries must be disposed of in accordance with the applicable
waste disposal regulations.
Use only the mains adapter supplied with this equipment. Incorrect
adapter polarity or voltage can seriously damage the unit.
The electrical network is classified as dangerous according to criteria
in the standard EN 60950. The only way to power down this product is by
unplugging the power supply from the electrical outlet. Ensure the electrical outlet
is located close to the apparatus and is always easily accessible.
4
What’s in the Box?
Make sure you have all these items in the box. For missing item(s), contact your dealer.
AT5220
Base Unit Handset Handset Battery Cover
Base Power Adapter NiMH AAA Battery x 2
User Guide
AT5220T
Base Unit Handset x 2 Handset Battery Cover x 2
Base Power Adapter NiMH AAA Battery x 4
User Guide Charger Charger Power
Adapter
To Next Page
Loading...