Amytel AT5220 - Call; Toggling Between Calls

13
Answering a second call
During a call, your phone sounds a short beep periodically to notify you of an incoming call.
1. Press to answer the call. You have put the first call on hold, and you are now connected
to the second call.
Toggling between two calls
1. Press to put the current call on hold and connect to the other call.
Adjusting the earpiece volume
1. Press or to adjust the volume during a call. Press to confirm.
Muting the microphone
The mute feature allows you to speak to someone in the house privately.
1. Press during a call. The caller cannot hear you, but you can still hear his voice.
Press again to un-mute the microphone. You can now communicate with the caller.
NOTE:
2
nd
Call Service.
Consult and subscribe from your s
ervice provider.
14
Intercom and Conference Calls
An intercom call is a call to another handset that shares the same base unit. A conference call involves
conversation between another handset and outside caller(s).
CALLING ANOTHER HANDSET
1. Press .
2. Press the target handset number.
3. Wait for the other party to answer your call.
4. Press to cancel or end the intercom call.
While you are on the phone of an outside call
While talking on an outside call, you can call another handset.
1. Press during the call.
2. Press the target handset number. Wait for the other party to answer your call.
To toggle between the calls
1. Press to switch between the outside call and the intercom call.
TRANSFERRING A CALL
1. Press during a call.
2. Press the target handset number.
3. Press after the other party answers your call. The outside call is now transferred to the
other handset.
MAKING A CONFERENCE CALL
A 3-way conference call is a call between you, an outside caller, and another handset user in your house.
You are talking on the phone with an outside caller, and you want to involve another handset user in this
conversation.
1. Press during your call with the outside caller.
2. Press the target handset number. Wait for the other party to answer your call.
3. Press and hold for 2 seconds. You are now on a 3-way conference call.
4. Press to end the conference call.
NOTE:
A 3
-
way conference call requires 2 handsets that share the same base unit.
NOTE:
An intercom call ca
n only involve 2 handsets that share the same base unit
.