Amytel AT5220 - Call; Making a Call

11
Call
MAKING A CALL
This section describes the different ways to make a call.
1. Press .
2. Dial the phone number. The number displays on the screen and is dialed out.
Pre-dialing
Pre-dialing lets you view and make changes to the number before making the call.
1. Enter the phone number. The number displays on the screen. You can make changes before
dialing out. Maximum 20 digits can be entered for the phone number.
Press to dial out the call.
Redialing the last number
1. Press .
2. Press . The last dialed number displays on the screen and is dialed out.
TIP: Press to erase a digit.
Press and hold to enter a pause. P displays on the screen.
NOTE:
Signal Strength. Check the signal strength before making a call and during a call.
For details, see Checking the signal strength on page 10.
NOTE:
Low Battery.
During a call, you will hear warning tones if your
handset is almost out of battery. Charge your handset as soon as possible or
your call will be cut off. Placing the handset on the base cradle or charger will
end the call. For details, see Checking the battery level on page 9.
NOTE:
Emergency Call.
Th
is telephone is not designed for making emergency
telephone calls when the power fails. Alternative arrangements should be made
for access to emergency services.
NOTE:
Call Timer.
During a call, the call timer displays the talk time of your
current call.
TIP: Use or to navigate the menus.
12
Calling from your phonebook
For details on the phonebook, see Phonebook on page 16.
1. Press .
2. Select the phonebook record you want.
3. Press to dial out the call.
Calling from the incoming call log
You can return a call from the incoming (received or missed) call log. For details, see Call Log on page 18.
1. Press .
2. Select the record you want.
3. Press to dial out the call.
ENDING A CALL
1. Press OR place the handset on the base cradle or charger.
ANSWERING A CALL
When you receive a call, your phone rings. Press to answer the call.
Turning off the ringer
You can turn off the ringer for all incoming calls.
1. Press and hold during standby. displays on the screen. For details on the ringer setting,
see Personalizing your handset’s sounds on page 19.
DURING A CALL
This section describes the features that are available during a call.
Making a second call
1. Press during a call. R displays on the screen.
2. Dial the number you want. The number displays on the screen and is dialed out.
TIP: Missed Call Alert. When a call is missed, your phone displays . Press
to view the missed calls.
TIP: Silent Ringer. When the phone is ringing, press to turn off the ringer.
NOTE:
2
nd
Call Service.
Consult and subscribe from your service provider.
NOTE:
Caller ID Service.
Consult and subscribe from your service provider.