Warning
1. Installation work and electric wiring (including switch
location) must be done by the qualifed person(s) in
accordance with local applicable codes and standards,
including fre-rated construction.
2. This hood may have sharp edges. Be careful to avoid cuts
and abrasions during installation and cleaning.
3. The hood must be placed at a minimum distance of 28"
from the cook panel.
4. Suffcient air is needed for proper combustion and exhausting
of gases through the chimney to prevent back drafting.
Follow the heating equipment manufacturer’s guideline and
safety standards such as those published by the National
Fire Protection Association, and the American Society for
Heating, Ref rigeration and Air Conditioning Engineer
(ASHRAE), and the local code authorities.
5. Ducted fans must always be vented to the outdoors.
6. This appliance is designed to be operated by adults. Childr en
were not allowed to temper with the controls or play with this
appliance.
7. WARNING: To reduce the risk of fre or electric shock, do not
use this fan with any solid-state speed control device.
8. When cutting or drilling into wall or ceiling, do not damage
electrical wiring and other hidden cables.
WARNING： TO REDUCE THE RISK OF FIRE, USE ONLY THE METAL
DUCTWORK
3
To Next Page
Loading...
