Pic 6-3
4. Display UI
When the ebike starts, the circuit board transmits the speed value
monitored by the vehicle speed monitoring device to the display for display.
When the speed sensor is working, the speed sensor sends the speed signal
to the controller, and the controller adjusts the motor speed and controls at the
same time. The device will feed back the motor speed to the meter. Displayed
by the display: real-time speed, total mileage (ODO), single-mile (Trip), riding
time (Time), maximum speed (MAX SPEED), average speed (AVG SPEED),
power-assisted gear, power, error code mode.
The current speed display, the speed display unit has two types of display:
During working, press Minus to decrease pas,
and long press to start Walking Assistant Mode
To Next Page
Loading...
Need help?
General
